Skip to content

Configuration options#

Using a configuration file#

k0s can be installed without a config file. In that case the default configuration will be used. You can, though, create and run your own non-default configuration (used by the k0s controller nodes).

k0s supports providing only partial configurations. In case of partial configuration is provided, k0s will use the defaults for any missing values.

  1. Generate a yaml config file that uses the default settings.

    mkdir -p /etc/k0s
k0s config create > /etc/k0s/k0s.yaml

  2. Modify the new yaml config file according to your needs, refer to Configuration file reference below. You can remove the default values if wanted as k0s supports partial configs too.

  3. Install k0s with your new config file.

    sudo k0s install controller -c /etc/k0s/k0s.yaml

  4. If you need to modify your existing configuration later on, you can change your config file also when k0s is running, but remember to restart k0s to apply your configuration changes.

    sudo k0s stop
sudo k0s start

Configuring k0s via k0sctl#

k0sctl can deploy your configuration options at cluster creation time. Your options should be placed in the spec.k0s.config section of the k0sctl's configuration file. See the section on how to install k0s via k0sctl and the k0sctl README for more information.

Configuration file reference#

CAUTION: As many of the available options affect items deep in the stack, you should fully understand the correlation between the configuration file components and your specific environment before making any changes.

A YAML config file follows, with defaults as generated by the k0s config create command:

apiVersion: k0s.k0sproject.io/v1beta1
kind: ClusterConfig
metadata:
  name: k0s
spec:
  api:
    address: 192.168.68.104
    externalAddress: my-lb-address.example.com
    k0sApiPort: 9443
    port: 6443
    sans:
    - 192.168.68.104
    tunneledNetworkingMode: false
  controllerManager: {}
  extensions:
    helm:
      concurrencyLevel: 5
      charts: null
      repositories: null
    storage:
      create_default_storage_class: false
      type: external_storage
  installConfig:
    users:
      etcdUser: etcd
      kineUser: kube-apiserver
      konnectivityUser: konnectivity-server
      kubeAPIserverUser: kube-apiserver
      kubeSchedulerUser: kube-scheduler
  konnectivity:
    adminPort: 8133
    agentPort: 8132
  network:
    calico: null
    clusterDomain: cluster.local
    dualStack: {}
    kubeProxy:
      metricsBindAddress: 0.0.0.0:10249
      mode: iptables
    kuberouter:
      autoMTU: true
      hairpin: Enabled
      ipMasq: false
      metricsPort: 8080
      mtu: 0
      peerRouterASNs: ""
      peerRouterIPs: ""
    nodeLocalLoadBalancing:
      enabled: false
      envoyProxy:
        apiServerBindPort: 7443
        image:
          image: docker.io/envoyproxy/envoy-distroless
          version: v1.24.1
        konnectivityServerBindPort: 7132
      type: EnvoyProxy
    podCIDR: 10.244.0.0/16
    provider: kuberouter
    serviceCIDR: 10.96.0.0/12
  scheduler: {}
  storage:
    etcd:
      externalCluster: null
      peerAddress: 192.168.68.104
    type: etcd
  telemetry:
    enabled: true
  featureGates:
    - name: feature_XXX
      enabled: true
      components: ["kubelet", "kube-api", "kube-scheduler"]
    - name: feature_YYY
      enabled: true
    -
      name: feature_ZZZ
      enabled: false

spec Key Detail#

spec.api#

Element Description
externalAddress The loadbalancer address (for k0s controllers running behind a loadbalancer). Configures all cluster components to connect to this address and also configures this address for use when joining new nodes to the cluster.
address Local address on which to bind an API. Also serves as one of the addresses pushed on the k0s create service certificate on the API. Defaults to first non-local address found on the node.
sans List of additional addresses to push to API servers serving the certificate.
extraArgs Map of key-values (strings) for any extra arguments to pass down to Kubernetes api-server process.
port¹ Custom port for kube-api server to listen on (default: 6443)
k0sApiPort¹ Custom port for k0s-api server to listen on (default: 9443)
tunneledNetworkingMode Whether to tunnel Kubernetes access from worker nodes via local port forwarding. (default: false)

¹ If port and k0sApiPort are used with the externalAddress element, the loadbalancer serving at externalAddress must listen on the same ports.

spec.storage#

Element Description
type Type of the data store (valid values:etcd or kine). Note: Type etcd will cause k0s to create and manage an elastic etcd cluster within the controller nodes.
etcd.peerAddress Node address used for etcd cluster peering.
etcd.extraArgs Map of key-values (strings) for any extra arguments to pass down to etcd process.
kine.dataSource kine datasource URL.

spec.network#

Element Description
provider Network provider (valid values: calico, kuberouter, or custom). For custom, you can push any network provider (default: kuberouter). Be aware that it is your responsibility to configure all of the CNI-related setups, including the CNI provider itself and all necessary host levels setups (for example, CNI binaries). Note: Once you initialize the cluster with a network provider the only way to change providers is through a full cluster redeployment.
podCIDR Pod network CIDR to use in the cluster.
serviceCIDR Network CIDR to use for cluster VIP services.
clusterDomain Cluster Domain to be passed to the kubelet and the coredns configuration.

spec.network.calico#

Element Description
mode vxlan (default), ipip or bird
overlay Overlay mode: Always (default), CrossSubnet or Never (requires mode=vxlan to disable calico overlay-network).
vxlanPort The UDP port for VXLAN (default: 4789).
vxlanVNI The virtual network ID for VXLAN (default: 4096).
mtu MTU for overlay network (default: 0, which causes Calico to detect optimal MTU during bootstrap).
wireguard Enable wireguard-based encryption (default: false). Your host system must be wireguard ready (refer to the Calico documentation for details).
flexVolumeDriverPath The host path for Calicos flex-volume-driver(default: /usr/libexec/k0s/kubelet-plugins/volume/exec/nodeagent~uds). Change this path only if the default path is unwriteable (refer to Project Calico Issue #2712 for details). Ideally, you will pair this option with a custom volumePluginDir in the profile you use for your worker nodes.
ipAutodetectionMethod Use to force Calico to pick up the interface for pod network inter-node routing (default: "", meaning not set, so that Calico will instead use its defaults). For more information, refer to the Calico documentation.
envVars Map of key-values (strings) for any calico-node environment variable.

spec.network.calico.envVars#

Environment variable's value must be string, e.g.:

spec:
  network:
    provider: calico
    calico:
      envVars:
        TEST_BOOL_VAR: "true"
        TEST_INT_VAR: "42"
        TEST_STRING_VAR: test

K0s runs Calico with some predefined vars, which can be overwritten by setting new value in spec.network.calico.envVars:

CALICO_IPV4POOL_CIDR: "{{ spec.network.podCIDR }}"
CALICO_DISABLE_FILE_LOGGING: "true"
FELIX_DEFAULTENDPOINTTOHOSTACTION: "ACCEPT"
FELIX_LOGSEVERITYSCREEN: "info"
FELIX_HEALTHENABLED: "true"
FELIX_PROMETHEUSMETRICSENABLED: "true"
FELIX_FEATUREDETECTOVERRIDE: "ChecksumOffloadBroken=true"

FELIX_FEATUREDETECTOVERRIDE: ChecksumOffloadBroken=true disables VXLAN offloading because of projectcalico/calico#4727.

In SingleStack mode there are additional vars:

FELIX_IPV6SUPPORT: "false"

In DualStack mode there are additional vars:

CALICO_IPV6POOL_NAT_OUTGOING: "true"
FELIX_IPV6SUPPORT: "true"
IP6: "autodetect"
CALICO_IPV6POOL_CIDR: "{{ spec.network.dualStack.IPv6podCIDR }}"

spec.network.kuberouter#

Element Description
autoMTU Autodetection of used MTU (default: true).
mtu Override MTU setting, if autoMTU must be set to false).
metricsPort Kube-router metrics server port. Set to 0 to disable metrics (default: 8080).
peerRouterIPs Comma-separated list of global peer addresses.
peerRouterASNs Comma-separated list of global peer ASNs.
hairpin Hairpin mode, supported modes Enabled: enabled cluster wide, Allowed: must be allowed per service using annotations, Disabled: doesn't work at all (default: Enabled)
hairpinMode Deprecated Use hairpin instead. If both hairpin and hairpinMode are defined, this is ignored. If only hairpinMode is configured explicitly activates hairpinMode (https://github.com/cloudnativelabs/kube-router/blob/master/docs/user-guide.md#hairpin-mode).
ipMasq IP masquerade for traffic originating from the pod network, and destined outside of it (default: false)

Note: Kube-router allows many networking aspects to be configured per node, service, and pod (for more information, refer to the Kube-router user guide).

spec.network.kubeProxy#

Element Description
disabled Disable kube-proxy altogether (default: false).
mode Kube proxy operating mode, supported modes iptables, ipvs, userspace (default: iptables)
iptables Kube proxy iptables settings
ipvs Kube proxy ipvs settings

Default kube-proxy iptables settings:

iptables:
  masqueradeAll: false
  masqueradeBit: null
  minSyncPeriod: 0s
  syncPeriod: 0s

Default kube-proxy ipvs settings:

ipvs:
  excludeCIDRs: null
  minSyncPeriod: 0s
  scheduler: ""
  strictARP: false
  syncPeriod: 0s
  tcpFinTimeout: 0s
  tcpTimeout: 0s
  udpTimeout: 0s

spec.network.nodeLocalLoadBalancing#

Configuration options related to k0s's node-local load balancing feature.

Note: This feature is experimental! Expect instabilities and/or breaking changes.

Element Description
enabled Indicates if node-local load balancing should be used to access Kubernetes API servers from worker nodes. Default: false.
type The type of the node-local load balancer to deploy on worker nodes. Default: EnvoyProxy. (This is the only option for now.)
envoyProxy Configuration options related to the "EnvoyProxy" type of load balancing.
spec.network.nodeLocalLoadBalancing.envoyProxy#

Configuration options required for using Envoy as the backing implementation for node-local load balancing.

Note: This type of load balancing is not supported on ARMv7 workers.

Element Description
image The OCI image that's being used for the Envoy Pod.
imagePullPolicy The pull policy being used used for the Envoy Pod. Defaults to spec.images.default_pull_policy if omitted.
apiServerBindPort Port number on which to bind the Envoy load balancer for the Kubernetes API server to on a worker's loopback interface. Default: 7443.
konnectivityServerBindPort Port number on which to bind the Envoy load balancer for the konnectivity server to on a worker's loopback interface. Default: 7132.

spec.controllerManager#

Element Description
extraArgs Map of key-values (strings) for any extra arguments you want to pass down to the Kubernetes controller manager process.

spec.scheduler#

Element Description
extraArgs Map of key-values (strings) for any extra arguments you want to pass down to Kubernetes scheduler process.

spec.workerProfiles#

Worker profiles are used to manage worker-specific configuration in a centralized manner. A ConfigMap is generated for each worker profile. Based on the --profile argument given to the k0s worker, the configuration in the corresponding ConfigMap is is picked up during startup.

The worker profiles are defined as an array. Each element has following properties:

Property Description
name String; name to use as profile selector for the worker process
values Object; Kubelet configuration overrides, see below for details

spec.workerProfiles[].values (Kubelet configuration overrides)#

The Kubelet configuration overrides of a profile override the defaults defined by k0s.

Note that there are several fields that cannot be overridden:

  • clusterDNS
  • clusterDomain
  • apiVersion
  • kind
  • staticPodURL

spec.featureGates#

Available components are:

  • kube-apiserver
  • kube-controller-manager
  • kubelet
  • kube-scheduler
  • kube-proxy

If components are omitted, propagates to all kube components.

Modifies extraArgs.

Example#

spec:
    featureGates:
      - name: feature-gate-0
        enabled: true
        components: ["kube-apiserver", "kube-controller-manager", "kubelet", "kube-scheduler"]
      - name: feature-gate-1
        enabled: true
      - name: feature-gate-2
        enabled: false

Kubelet feature gates example#

The below is an example of a k0s config with feature gates enabled:

spec:
    featureGates:
      - name: DevicePlugins
        enabled: true
        components: ["kubelet"]
      - name: Accelerators
        enabled: true
        components: ["kubelet"]
      - name: AllowExtTrafficLocalEndpoints
        enabled: false

Configuration examples#

Custom volumePluginDir#
spec:
  workerProfiles:
    - name: custom-pluginDir
      values:
         volumePluginDir: /var/libexec/k0s/kubelet-plugins/volume/exec
Eviction Policy#
spec:
  workerProfiles:
    - name: custom-eviction
      values:
        evictionHard:
          memory.available: "500Mi"
          nodefs.available: "1Gi"
          imagefs.available: "100Gi"
        evictionMinimumReclaim:
          memory.available: "0Mi"
          nodefs.available: "500Mi"
          imagefs.available: "2Gi"
Unsafe Sysctls#
spec:
  workerProfiles:
    - name: custom-eviction
      values:
        allowedUnsafeSysctls:
          - fs.inotify.max_user_instances

spec.images#

Nodes under the images key all have the same basic structure:

spec:
  images:
    coredns:
      image: quay.io/coredns/coredns
      version: v1.7.0

If you want the list of default images and their versions to be included, use k0s config create --include-images.

Available keys#

  • spec.images.konnectivity
  • spec.images.metricsserver
  • spec.images.kubeproxy
  • spec.images.coredns
  • spec.images.calico.cni
  • spec.images.calico.flexvolume
  • spec.images.calico.node
  • spec.images.calico.kubecontrollers
  • spec.images.kuberouter.cni
  • spec.images.kuberouter.cniInstaller
  • spec.images.repository¹

¹ If spec.images.repository is set and not empty, every image will be pulled from images.repository

If spec.images.default_pull_policy is set and not empty, it will be used as a pull policy for each bundled image.

Image example#

images:
  repository: "my.own.repo"
  konnectivity:
    image: calico/kube-controllers
    version: v3.16.2
  metricsserver:
    image: registry.k8s.io/metrics-server/metrics-server
    version: v0.6.4

In the runtime the image names are calculated as my.own.repo/calico/kube-controllers:v3.16.2 and my.own.repo/metrics-server/metrics-server:v0.6.4. This only affects the the imgages pull location, and thus omitting an image specification here will not disable component deployment.

spec.extensions.helm#

spec.extensions.helm is the config file key in which you configure the list of Helm repositories and charts to deploy during cluster bootstrap (for more information, refer to Helm Charts).

spec.extensions.storage#

spec.extensions.storage controls bundled storage provider. The default value external makes no storage deployed.

To enable embedded host-local storage provider use the following configuration:

spec:
  extensions:
    storage:
      type: openebs_local_storage

spec.konnectivity#

The spec.konnectivity key is the config file key in which you configure Konnectivity-related settings.

  • agentPort agent port to listen on (default 8132)
  • adminPort admin port to listen on (default 8133)

spec.telemetry#

To improve the end-user experience k0s is configured by defaul to collect telemetry data from clusters and send it to the k0s development team. To disable the telemetry function, change the enabled setting to false.

The telemetry interval is ten minutes.

spec:
  telemetry:
    enabled: true

Disabling controller components#

k0s allows to completely disable some of the system components. This allows users to build a minimal Kubernetes control plane and use what ever components they need to fulfill their need for the control plane. Disabling the system components happens through a command line flag for the controller process:

--disable-components strings                     disable components (valid items: api-config,autopilot,control-api,coredns,csr-approver,endpoint-reconciler,helm,konnectivity-server,kube-controller-manager,kube-proxy,kube-scheduler,metrics-server,network-provider,node-role,system-rbac,worker-config)

Note: As of k0s 1.26, the kubelet-config component has been replaced by the worker-config component. k0s will issue a warning when the old component name is being used. It is scheduled for removal in k0s 1.27. Please update to the new component name.

If you use k0sctl, just add the flag when installing the cluster for the first controller at spec.hosts.installFlags in the config file like e.g.:

spec:
  hosts:
  - role: controller
    installFlags:
    - --disable-components=metrics-server

As seen from the component list, the only always-on component is the Kubernetes api-server, without that k0s serves no purpose.