Skip to content

Configuration options#

Using a configuration file#

k0s can be installed without a config file. In that case the default configuration will be used. You can, though, create and run your own non-default configuration (used by the k0s controller nodes).

  1. Generate a yaml config file that uses the default settings.

    mkdir -p /etc/k0s
k0s default-config > /etc/k0s/k0s.yaml

  2. Modify the new yaml config file according to your needs, refer to Configuration file reference below.

  3. Install k0s with your new config file.

    sudo k0s install controller -c /etc/k0s/k0s.yaml

  4. If you need to modify your existing configuration later on, you can change your config file also when k0s is running, but remember to restart k0s to apply your configuration changes.

    sudo k0s stop
sudo k0s start

Configuration file reference#

CAUTION: As many of the available options affect items deep in the stack, you should fully understand the correlation between the configuration file components and your specific environment before making any changes.

A YAML config file follows, with defaults as generated by the k0s default-config command:

apiVersion: k0s.k0sproject.io/v1beta1
kind: Cluster
metadata:
  name: k0s
spec:
  api:
    address: 192.168.68.104
    port: 6443
    k0sApiPort: 9443
    externalAddress: my-lb-address.example.com
    sans:
      - 192.168.68.104
  storage:
    type: etcd
    etcd:
      peerAddress: 192.168.68.104
  network:
    podCIDR: 10.244.0.0/16
    serviceCIDR: 10.96.0.0/12
    provider: kuberouter
    calico: null
    kuberouter:
      mtu: 0
      peerRouterIPs: ""
      peerRouterASNs: ""
      autoMTU: true
  podSecurityPolicy:
    defaultPolicy: 00-k0s-privileged
  telemetry:
    enabled: true
  installConfig:
    users:
      etcdUser: etcd
      kineUser: kube-apiserver
      konnectivityUser: konnectivity-server
      kubeAPIserverUser: kube-apiserver
      kubeSchedulerUser: kube-scheduler
  images:
    konnectivity:
      image: k8s.gcr.io/kas-network-proxy/proxy-agent
      version: v0.0.25
    metricsserver:
      image: k8s.gcr.io/metrics-server/metrics-server
      version: v0.5.0
    kubeproxy:
      image: k8s.gcr.io/kube-proxy
      version: v1.22.5
    coredns:
      image: k8s.gcr.io/coredns/coredns
      version: v1.7.0
    calico:
      cni:
        image: docker.io/calico/cni
        version: v3.18.1
      node:
        image: docker.io/calico/node
        version: v3.18.1
      kubecontrollers:
        image: docker.io/calico/kube-controllers
        version: v3.18.1
    kuberouter:
      cni:
        image: docker.io/cloudnativelabs/kube-router
        version: v1.2.1
      cniInstaller:
        image: quay.io/k0sproject/cni-node
        version: 0.1.0
    default_pull_policy: IfNotPresent
  konnectivity:
    agentPort: 8132
    adminPort: 8133

spec Key Detail#

spec.api#

Element Description
externalAddress The loadbalancer address (for k0s controllers running behind a loadbalancer). Configures all cluster components to connect to this address and also configures this address for use when joining new nodes to the cluster.
address Local address on wihich to bind an API. Also serves as one of the addresses pushed on the k0s create service certificate on the API. Defaults to first non-local address found on the node.
sans List of additional addresses to push to API servers serving the certificate.
extraArgs Map of key-values (strings) for any extra arguments to pass down to Kubernetes api-server process.
port¹ Custom port for kube-api server to listen on (default: 6443)
k0sApiPort¹ Custom port for k0s-api server to listen on (default: 9443)

¹ If port and k0sApiPort are used with the externalAddress element, the loadbalancer serving at externalAddress must listen on the same ports.

spec.storage#

Element Description
type Type of the data store (valid values:etcd or kine). Note: Type etcd will cause k0s to create and manage an elastic etcd cluster within the controller nodes.
etcd.peerAddress Node address used for etcd cluster peering.
kine.dataSource kine datasource URL.

spec.network#

Element Description
provider Network provider (valid values: calico, kuberouter, or custom). For custom, you can push any network provider (default: kuberouter). Be aware that it is your responsibility to configure all of the CNI-related setups, including the CNI provider itself and all necessary host levels setups (for example, CNI binaries). Note: Once you initialize the cluster with a network provider the only way to change providers is through a full cluster redeployment.
podCIDR Pod network CIDR to use in the cluster.
serviceCIDR Network CIDR to use for cluster VIP services.

spec.network.calico#

Element Description
mode vxlan (default) or ipip
overlay Overlay mode: Always (default), CrossSubnet or Never (requires mode=vxlan to disable calico overlay-network).
vxlanPort The UDP port for VXLAN (default: 4789).
vxlanVNI The virtual network ID for VXLAN (default: 4096).
mtu MTU for overlay network (default: 0, which causes Calico to detect optimal MTU during bootstrap).
wireguard Enable wireguard-based encryption (default: false). Your host system must be wireguard ready (refer to the Calico documentation for details).
flexVolumeDriverPath The host path for Calicos flex-volume-driver(default: /usr/libexec/k0s/kubelet-plugins/volume/exec/nodeagent~uds). Change this path only if the default path is unwriteable (refer to Project Calico Issue #2712 for details). Ideally, you will pair this option with a custom volumePluginDir in the profile you use for your worker nodes.
ipAutodetectionMethod Use to force Calico to pick up the interface for pod network inter-node routing (default: "", meaning not set, so that Calico will instead use its defaults). For more information, refer to the Calico documentation.

spec.network.kuberouter#

Element Description
autoMTU Autodetection of used MTU (default: true).
mtu Override MTU setting, if autoMTU must be set to false).
peerRouterIPs Comma-separated list of global peer addresses.
peerRouterASNs Comma-separated list of global peer ASNs.

Note: Kube-router allows many networking aspects to be configured per node, service, and pod (for more information, refer to the Kube-router user guide).

spec.podSecurityPolicy#

Use the spec.podSecurityPolicy key to configure the default PSP.

k0s creates two PSPs out-of-the-box:

PSP Description
00-k0s-privileged Default; no restrictions; used also for Kubernetes/k0s level system pods.
99-k0s-restricted Does not allow any host namespaces or root users, nor any bind mounts from the host

Note: Users can create supplemental PSPs and bind them to users / access accounts as necessary.

spec.controllerManager#

Element Description
extraArgs Map of key-values (strings) for any extra arguments you want to pass down to the Kubernetes controller manager process.

spec.scheduler#

Element Description
extraArgs Map of key-values (strings) for any extra arguments you want to pass down to Kubernetes scheduler process.

spec.workerProfiles#

Array of spec.workerProfiles.workerProfile. Each element has following properties:

Property Description
name String; name to use as profile selector for the worker process
values Mapping object

For each profile, the control plane creates a separate ConfigMap with kubelet-config yaml. Based on the --profile argument given to the k0s worker, the corresponding ConfigMap is used to extract the kubelet-config.yaml file. values are recursively merged with default kubelet-config.yaml

Note that there are several fields that cannot be overridden:

  • clusterDNS
  • clusterDomain
  • apiVersion
  • kind

Examples#

mapping:

spec:
  workerProfiles:
    - name: custom-role
      values:
         key: value
         mapping:
             innerKey: innerValue

Custom volumePluginDir:

spec:
  workerProfiles:
    - name: custom-role
      values:
         volumePluginDir: /var/libexec/k0s/kubelet-plugins/volume/exec

spec.images#

Nodes under the images key all have the same basic structure:

spec:
  images:
    coredns:
      image: quay.io/coredns/coredns
      version: v1.7.0

Available keys#

  • spec.images.konnectivity
  • spec.images.metricsserver
  • spec.images.kubeproxy
  • spec.images.coredns
  • spec.images.calico.cni
  • spec.images.calico.flexvolume
  • spec.images.calico.node
  • spec.images.calico.kubecontrollers
  • spec.images.kuberouter.cni
  • spec.images.kuberouter.cniInstaller
  • spec.images.repository¹

¹ If spec.images.repository is set and not empty, every image will be pulled from images.repository

If spec.images.default_pull_policy is set and not empty, it will be used as a pull policy for each bundled image.

Example#

images:
  repository: "my.own.repo"
  konnectivity:
    image: calico/kube-controllers
    version: v3.16.2
  metricsserver:
    image: k8s.gcr.io/metrics-server/metrics-server
    version: v0.5.0

In the runtime the image names are calculated as my.own.repo/calico/kube-controllers:v3.16.2 and my.own.repo/metrics-server/metrics-server:v0.5.0. This only affects the the imgages pull location, and thus omitting an image specification here will not disable component deployment.

spec.extensions.helm#

spec.extensions.helm is the config file key in which you configure the list of Helm repositories and charts to deploy during cluster bootstrap (for more information, refer to Helm Charts).

spec.konnectivity#

The spec.konnectivity key is the config file key in which you configure Konnectivity-related settings.

  • agentPort agent port to listen on (default 8132)
  • adminPort admin port to listen on (default 8133)

spec.telemetry#

To improve the end-user experience k0s is configured by defaul to collect telemetry data from clusters and send it to the k0s development team. To disable the telemetry function, change the enabled setting to false.

The telemetry interval is ten minutes.

spec:
    telemetry:
      enabled: true

Disabling controller components#

k0s allows completely disabling some of the system components. This allows the user to build a minimal Kubernetes control plane and use what ever components they need to fullfill their need for the controlplane. Disabling the system components happens through a commandline flag for the controller process:

--disable-components strings                     disable components (valid items: konnectivity-server,kube-scheduler,kube-controller-manager,control-api,csr-approver,default-psp,kube-proxy,coredns,network-provider,helm,metrics-server,kubelet-config,system-rbac)

As seen from the component list above, the only always-on component is the Kubernetes api-server, without that k0s serves no purpose.